Descripción del producto
DINITROL ML fue desarrollado para su uso en cavidades cerradas, como puertas, partes del marco y bisagras y huecos externos. El producto puede utilizarse como protección contra la corrosión en automóviles, camiones, autobuses y otros vehículos usados.
Beneficios
Marrón
Extremadamente penetrante
Detiene la corrosión en curso
Desplazamiento del agua
Película aceitosa y flexible
Húmedo sobre húmedo con revestimiento bituminoso para bajos de vehículos
Aplicación
DINITROL ML está diseñado para su aplicación en cavidades cerradas, como puertas, miembros del marco y juntas y grietas exteriores. El producto puede utilizarse para proteger contra la oxidación de automóviles, camiones, autobuses y otros vehículos usados. La temperatura de aplicación debe estar entre 15 y 30 °C.
Método de uso
DINITROL ML se aplica mediante pulverización manual o semiautomática.
Equipo de aplicación DINITROL, y es adecuado tanto para pulverización con aire mezclado como sin aire.
Sustratos de pretratamiento
DINITROL ML se puede aplicar sobre superficies húmedas y corroídas. Para obtener los mejores resultados, se debe eliminar la corrosión suelta antes de la aplicación.
Recubrimiento / aplicación de 2 capas
DINITROL ML se puede aplicar sobre cualquiera de los recubrimientos bituminosos para bajos de carrocería de DINITROL. Para obtener información adicional, consulte con DINOL GmbH.
Almacenamiento
El producto se debe almacenar a una temperatura de entre 15 y 30 °C y la vida útil es de 2 años en los envases originales sin abrir.
Datos técnicos
Color marrón
Tipo de película aceitosa, grasosa
Densidad a 23 °C 860 kg/m³
Viscosidad a 23 °C, (DIN 2) 60 segundos
Contenido de materia seca 46 % en peso
Punto de inflamación 40 °C
Contenido aromático en disolvente < 1 %
Espesor de película recomendado 10 ?m
Espesor de película recomendado en húmedo 30 ?m
Tiempo de secado 1 hora
Resistencia al calor 80 °C
Adherencia a baja temperatura < - 40 °C
Prueba de niebla salina > 96 horas
Penetración en un espacio de 50 ?m de ancho > 70 mm
Efecto sobre la pintura del coche ninguno
Capacidad de eliminación White Spirit
Disponible en Miniservice de 1 L / Cubo de 5 L / Cubo de 20 L
Tambor de 60 L / Bidón de 208 L / Contenedor
DINITROL 4941 / 4941 CAR es Producto protector de larga duración. El producto deja una película negra firme con un tiempo de secado corto y buena adherencia y flexibilidad sobre todas las superficies metálicas, piezas de goma y plástico.
Beneficios
Referencias OEM
Película universal robusta
Autorreparación
Fácil aplicación
Buena resistencia a la abrasión
Protección de componentes
Aplicaciones
DINITROL 4941 / 4941 CAR es un producto para bajos de carrocería que se utiliza en el tratamiento de vehículos durante la producción, en plantas de importación y en aplicaciones posventa. Cuando se aplica sobre una superficie limpia y seca, se adhiere tanto a superficies pintadas como a las recubiertas con una capa de PVC o material similar. El producto no daña el zinc, la goma ni los plásticos.
La facilidad de aplicación y el alto contenido de materia seca del producto garantizan un tratamiento limpio y económico en la línea. DINITROL 4941 / 4941 CAR también está diseñado para su uso en piezas de repuesto, máquinas y estructuras de hierro y acero en entornos altamente corrosivos. DINITROL 4941 / 4941 CAR también es muy adecuado como revestimiento anticorrosivo para el transporte y el almacenamiento en condiciones extremadamente corrosivas.
Método de uso
DINITROL 4941 / 4941 CAR se puede aplicar con equipos de aplicación manuales o automáticos, airless o airmix.
La temperatura de aplicación y del producto recomendada es de 15 ? 30 °C.
Sustratos de pretratamiento
DINITROL 4941 / 4941 CAR se puede aplicar directamente sobre superficies limpias, secas y libres de corrosión.
Si hay corrosión, se debe aplicar antes DINITROL ML o una cera para cavidades DINITROL.
Recubrimiento / Aplicación de 2 capas
DINITROL 4941 / 4941 CAR no se puede repintar.
Para obtener información adicional, consulte con DINOL GmbH.
Datos técnicos
Color: negro
Tipo de película: dura, cerosa
Densidad a 23 °C: aprox. 1100 kg/m³
Viscosidad a 23°C - 800 mPas
Contenido de materia seca - 69% en peso
Punto de inflamación - 36°C
Contenido aromático en disolvente - 0,5%
Espesor de película recomendado en húmedo - 700 ?m
Espesor de capa recomendado - 300 ? 500 ?m
Tiempo de secado - 6 ? 12 Stunden hasta seco
Adherencia a baja temperatura - -20°C
Capacidad de eliminación - Disolventes de hidrocarburos
Resistencia al calor - 130°C
Resistencia a la niebla salina, 300 m - 1500 horas
DINITROL 4010 Corroheat deja una película transparente y dura que es resistente tanto a los álcalis como a los ácidos y es resistente al calor hasta una temperatura de 200°C. Posee una película limpia y libre de pegajosidad que facilita la inspección visual de superficies metálicas, la lectura de etiquetas y números, etc.
BENEFICIOS
Protección del motor
Resistencia a altas temperaturas
Alta adherencia
Protección a largo plazo
APLICACIONES
La adherencia y flexibilidad sobre piezas de caucho y plástico tanto a bajas como a altas temperaturas son muy buenas. Las piezas adecuadas para ser tratadas con DINITROL 4010 Corroheat son compartimentos de motor, motores y otras piezas que tengan que soportar altas temperaturas.
MÉTODO DE USO
DINITROL 4010 Corroheat debe aplicarse sobre una superficie limpia y seca. Se pueden utilizar equipos de alta o baja presión, airless o air mix. Temperatura de aplicación entre 15 y 30°C. La dureza, flexibilidad y adherencia del producto aumentan a temperaturas de secado más altas.
TRATAMIENTO PREVIO
Sustratos Las superficies deben estar secas, limpias y libres de corrosión.
RECUBRIMIENTO
Normalmente no debe repintarse. Para obtener información adicional, consulte
ENGLISH DESCRIPTION
Product Description
DINITROL ML was developed for use in closed cavities such as doors, frame parts and external hinges and gaps. The product can be used as corrosion protection for used cars, trucks, buses and other vehicles.
Benefits
Brown
Extremely Penetrating
Stops ongoing corrosion
Water displacing
Oily, flexible film
Wet in wet with bitumen vehicle Underbody coating
Application
DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles. Application temperature should be between 15 and 30°C.
Method of use
DINITROL ML is applied by spraying with manual or semi-automatic.
DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
Pre-treatment Substrates
DINITROL ML is possible to apply on mois and corroded surfaces. For the best result, loose corrosion shall be removed before application.
Over-Coating / 2-Layer-Application
DINITROL ML can be over-applied with any of the DINITROL bitumen underbody coatings. For additional information, please consult DINOL GmbH.
Storage
The product shall be stored at 15 ? 30°C and the shelf life is then 2 years in unopened original packages.
Technical Data
Colour brown
Type of film oily, greasy
Density at 23°C 860 kg/m³
Viscosity at 23°C, (DIN 2) 60 seconds
Dry matter content 46% by weight
Flash point 40°C
Aromatic content in solvent < 1 %
Recommendes film thickness 10 ?m
Recommended film thickness wet 30 ?m
Drying time 1 hour
Heat resistance 80°C
Low temperature adhesion < - 40°C
Salt spray test > 96 hours
Penetration in 50 ?m wide gap > 70 mm
Effect on car paint none
Removability White Spirit
Available in 1 L Miniservice / 5L Pail / 20 L Pail
60 L Drum / 208 L Drum / Container
DINITROL 4941 / 4941 CAR is a long term protective product. The product leaves a firm, black film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts.
Benefits
OEM references
Robust universal film
Self-healing
Easily applied
Good abrasion resistance
Component protection
Applications
DINITROL 4941 / 4941 CAR is an underbody product or use in the treatment of vehicles during production, at import plants and in aftermarket applications. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product.
A clean and economic treatment on the line is assured by the products ease of application and high dry matter content. DINITROL 4941 / 4941 CAR is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environments. DINITROL 4941 / 4941 CAR is also very suitable as an anticorrosive coating for transport and warehousing under extremely corrosive conditions.
Method of use
DINITROL 4941 / 4941 CAR can be applied by manual or automatic application equipment, airless or airmix.
Recommended application and product temperature is 15 ? 30°C.
Pre-treatment Substrates
DINITROL 4941 / 4941 CAR can be applied directly to clean, dry and corrosion free surfaces.
If corrosion is present, DINITROL ML or a DINITROL cavity wax shall be applied before.
Over-Coating / 2-Layer-Application
DINITROL 4941 / 4941 CAR can not be over-painted.
For additional information, please consult DINOL GmbH.
Technical Data
Colour - black
Type of film - hard, waxy
Density at 23°C - approx. 1100 kg/m³
Viscosity at 23°C - 800 mPas
Dry matter content - 69% by weight
Flash point - 36°C
Aromatic content in solvent - 0,5%
Recommended film thickness wet - 700 ?m
Recommended layer thickness - 300 ? 500 ?m
Drying time - 6 ? 12 Stunden through dry
Low temperature adhesion - -20°C
Removability - Hydrocarbon solvents
Heat resistance - 130°C
Salt spray resistance, 300 m - 1500 hours
DINITROL 4010 Corroheat leaves a hard, transparent film that is resistant to both alkali and acids and is heat resistant up to a temperature of 200°C. It has a tack-free and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers etc.
BENEFITS
Engine protection
High temperature resistance
High adhesion
Long term protection
APPLICATIONS
The adhesion and flexibility on rubber and plastic parts at both low and high temperatures are very good. Appropriate parts to be treated with DINITROL 4010 Corroheat are engine compartments, engines and other parts which have to withstand high temperatures.
METHOD OF USE
DINITROL 4010 Corro heat should be applied on a clean, dry surface. High or low-pressure equipment can be used, airless or air mix. Application temperature between 15 to 30°C. Product hardness, flexibility and adhesion increase at higher drying temperatures.
PRE-TREATMENT
Substrates Surfaces shall be dry, clean and free from corrosion.
OVER-COATING
Normally not to be overpainted. For additional information, please consult
ENGLISH DESCRIPTION
Product Description
DINITROL ML was developed for use in closed cavities such as doors, frame parts and external hinges and gaps. The product can be used as corrosion protection for used cars, trucks, buses and other vehicles.
Benefits
Brown
Extremely Penetrating
Stops ongoing corrosion
Water displacing
Oily, flexible film
Wet in wet with bitumen vehicle Underbody coating
Application
DINITROL ML is designed for application into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles. Application temperature should be between 15 and 30°C.
Method of use
DINITROL ML is applied by spraying with manual or semi-automatic.
DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
Pre-treatment Substrates
DINITROL ML is possible to apply on mois and corroded surfaces. For the best result, loose corrosion shall be removed before application.
Over-Coating / 2-Layer-Application
DINITROL ML can be over-applied with any of the DINITROL bitumen underbody coatings. For additional information, please consult DINOL GmbH.
Storage
The product shall be stored at 15 ? 30°C and the shelf life is then 2 years in unopened original packages.
Technical Data
Colour brown
Type of film oily, greasy
Density at 23°C 860 kg/m³
Viscosity at 23°C, (DIN 2) 60 seconds
Dry matter content 46% by weight
Flash point 40°C
Aromatic content in solvent < 1 %
Recommendes film thickness 10 ?m
Recommended film thickness wet 30 ?m
Drying time 1 hour
Heat resistance 80°C
Low temperature adhesion < - 40°C
Salt spray test > 96 hours
Penetration in 50 ?m wide gap > 70 mm
Effect on car paint none
Removability White Spirit
Available in 1 L Miniservice / 5L Pail / 20 L Pail
60 L Drum / 208 L Drum / Container
DINITROL 4941 / 4941 CAR is a long term protective product. The product leaves a firm, black film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts.
Benefits
OEM references
Robust universal film
Self-healing
Easily applied
Good abrasion resistance
Component protection
Applications
DINITROL 4941 / 4941 CAR is an underbody product or use in the treatment of vehicles during production, at import plants and in aftermarket applications. When applied to a clean, dry surface, it adheres to both painted surfaces and those coated with a layer of PVC or similar material. Zinc, rubber and plastics are completely unharmed by the product.
A clean and economic treatment on the line is assured by the products ease of application and high dry matter content. DINITROL 4941 / 4941 CAR is also designed for use on spare parts, machines and iron and steel structures in highly corrosive environments. DINITROL 4941 / 4941 CAR is also very suitable as an anticorrosive coating for transport and warehousing under extremely corrosive conditions.
Method of use
DINITROL 4941 / 4941 CAR can be applied by manual or automatic application equipment, airless or airmix.
Recommended application and product temperature is 15 ? 30°C.
Pre-treatment Substrates
DINITROL 4941 / 4941 CAR can be applied directly to clean, dry and corrosion free surfaces.
If corrosion is present, DINITROL ML or a DINITROL cavity wax shall be applied before.
Over-Coating / 2-Layer-Application
DINITROL 4941 / 4941 CAR can not be over-painted.
For additional information, please consult DINOL GmbH.
Technical Data
Colour - black
Type of film - hard, waxy
Density at 23°C - approx. 1100 kg/m³
Viscosity at 23°C - 800 mPas
Dry matter content - 69% by weight
Flash point - 36°C
Aromatic content in solvent - 0,5%
Recommended film thickness wet - 700 ?m
Recommended layer thickness - 300 ? 500 ?m
Drying time - 6 ? 12 Stunden through dry
Low temperature adhesion - -20°C
Removability - Hydrocarbon solvents
Heat resistance - 130°C
Salt spray resistance, 300 m - 1500 hours
DINITROL 4010 Corroheat leaves a hard, transparent film that is resistant to both alkali and acids and is heat resistant up to a temperature of 200°C. It has a tack-free and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers etc.
BENEFITS
Engine protection
High temperature resistance
High adhesion
Long term protection
APPLICATIONS
The adhesion and flexibility on rubber and plastic parts at both low and high temperatures are very good. Appropriate parts to be treated with DINITROL 4010 Corroheat are engine compartments, engines and other parts which have to withstand high temperatures.
METHOD OF USE
DINITROL 4010 Corro heat should be applied on a clean, dry surface. High or low-pressure equipment can be used, airless or air mix. Application temperature between 15 to 30°C. Product hardness, flexibility and adhesion increase at higher drying temperatures.
PRE-TREATMENT
Substrates Surfaces shall be dry, clean and free from corrosion.
OVER-COATING
Normally not to be overpainted. For additional information, please consult
